銑方機床

描述：ZSK40銑方機床適應中小型零件銑外方，二、四、六、八方等。采用數控系統，可實現曲面、臺階面、孤性面、錐面加工。

更新時間：2025-12-02

產品型號：ZSK40

廠商性質：生產廠家

詳情介紹

銑方機床

一、ZSK40銑方機床設備特點：

1.適應中小型零件銑外方，二、四、六、八方等。

2.采用數控系統，可實現曲面、臺階面、孤性面、錐面加工。

3.運作模式手動，半自動可選;可加裝送料裝置，實現全自動化生產，節省人力。

4.改變傳統銑方加工工藝，可提高2- 5倍效益，且產品表面光潔度高。

1. Adapt to milling of small and medium- sized parts outside, two, tour, six, eight, etc.

2. Using a numerical control system, it can reilze the processing of curved surfaces,

stepped surfaces, solitary surfaces and conical surfaces.

3. The operatlion mode Is manual and seml- -automatic optonal; feeding devlce can

be added to realize fully automated production and save manpower.

4. Changing the traditional milling processing technology can increase the eficiency

by 2-5 times, and the surface finish of the product is high.

銑方機床

二、設備參數：

最大工件切削直徑Max.utting Diameterof workpiece	60mm	鐵方產品表面光潔度The roughness of product surface	1.6 -3.2μm
車方有效行程Efective travel o polygon	80mm	正常工作油泵壓力Normnal working oil pump pressure	20-40mpa
主軸通孔直徑Spingle hole diameter	φ48mm	X/Y軸伺服電機XY aixs servo motor	4N.m/4N.m
拉管通孔直徑Drawn pipe hole diam	040mm	控制器變壓器Controllr transformer	1.5kw
主電機功率Main motor power	2.2kw-6	機床變壓器Machine tool transformer	150w
變頻器Inverter	3.7kw	外部電源Extemal power supply	380v/3ph/50hz
主軸轉速范圍Spindle speed range	100-1200rpm	機床尺寸Machine outside dimensions	150010201640mm
車方對邊公差polygon tolerance of opposite side	0.05mm	機床凈重Machine net weight	900KG
車方長度公差polygon length tolerance	0.08mm